---

Popfasteners, Rivets & Eyelets
Please scroll down for our range.

UK Sewing Services recommends that suitability tests are carried out on all items prior to production.

All prices shown on this site are in GBP, pounds sterling. Click here for currency rates.

---

Round plastic pop fastener (GBP per 1000 sets)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

This fastener must be set using a press. Please see KPR1  (below).
n/a = Not currently available.

Product code='Product code'+Colour+quantity (minimum 020P & 021P 2000sets, 022P 1000 sets)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP,  pounds sterling.

---

Snap-tape (Poppa / Duvet tape)

---

10mm square plastic popfastener (GBP per 1000 sets)

(Image as an indication of style only, actual design may vary)

The 4 part set should be placed using our KPR1(below).
Product code=WHPSNP+2partset/4partset+quantity)
Order form
(Please load the order form once only)
(Currently only white available.) 
All prices shown on this site are in GBP pounds sterling

See next item for clear plastic sew-on popfasteners.

---

6mm Clear plastic sew-on popfastener

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Product code = POPSEWONCLR+quantity (minimum 300 sets)

Order form
(Please load the order form once only)
All prices shown on this site are in GBP, pounds sterling.

---

Popfasteners 10mm prong ring sets (recommended for stretch fabrics)
This is a brass based nickel free rustless stud.

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)



Available in Silver(Nickel free), Bronze (Gun metal) Black, White, Light Pink, Light Blue & Red.

(Normally seen on Warehouse coats, boilersuits & stretch fabrics, minimum 1000pk)
(This stud may also be purchased in 1000 individual component parts).

Please see KPR1 below for stud press

---

Popfasteners 12mm cap sets 1000 pack (Brass-based rustless)
(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)

Available in Black, Black nickel, White, Hammered finish nickel free silver finish, Light Pink & Light Blue.

Product code=032B+Style+pack+quantity (minimum 1000 pack)
This stud may be purchased in 1000 individual component parts. Please ask for details)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

Please see KPR1 below for stud press

---

Poppa-pliers for 10mm & 12mm above (GBP each) minimum 1 pair)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)
 

---

Heavy Duty Ring spring (GBP per pack)

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)

B = Brass based  S= Steel based.
Article: 051(large stud) is sold as standard with a 15mm cap in Nickel(silver, "S"+"B") Bronze("S"+"B") or Gilt(gold, "S" only);
Article: 050S(medium stud ) is sold as standard with 13mm cap in Nickel(silver, ) Gilt or Antique Brass.

Product code="Article"+finish+packsize
(minimum 1000 set/component pack )
This stud may also be purchased in 1000 individual component parts, please ask for details.
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling
Please see KPR1 below for stud press

---

Jean Buttons (GBP per 1000)

Product code = (as above) + quantity (minimum 1000 sets)
Please ask about our bulk order discounts
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

If you only require a very small quantity of the above items , please try HERE

Please see KPR1 below for stud press

---

Lacing hooks (GBP per pack)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Steel-based lacing hooks with integral rivet are available in the following finishes
Product codes:
Gilt  = SKTCGLT+ quantity; Nickel = SKTCLG+ quantity ;  Bronze = SKTCSM+quantity, 
Order form
(Please load the order form once only)
This product must be set on a press.

If you only require a very small quantity of the above items , please try HERE

---

Pyramid "Dog-Collar" stud ( GBP per pack)
(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)

Steel-based silver "Dog-collar" style Pyramid stud.
Normally set on a press. Please see below for hand setting tools.

Product code=PYSTD10 (minimum 1 pack)

Order form
(Please load the order form once only)

If you only require a very small quantity of the above items , please try HERE

Retaining washers are sometimes used with the above. These are available in nickel or gilt finish as follows:

 Product code=RIVWASH="finish"+"quantity" (minimum 1 pack)

Order form
(Please load the order form once only)
Please see KPR1 below for stud press

Pyramid "Dog-Collar" stud hand setting tool set

Picture for illustration only: Actual tool set design may vary.

Cutter punch ( bottom item, optional)	19.08
Setting set (2 part, top items)	72.16

Product codes =
DIE/PY10/CUTTERFINEPUNCH +"quantity" (minimum 1)
(The "fine punch" is optional as it may be possible to use an alternative to cut holes, however it is deigned specifically for this purpose)
DIE/PY10/HANDSET +"quantity" (minimum 1 set)

Order form
(Please load the order form once only)
Please see KPR1 below for stud press

---

Jean / reinforcing rivets ( GBP per 1000 sets, including nail, not shown)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

This rivet is traditionally used as reinforcing on jeans, however it is now used on many applications where a strong decorative reinforcing is needed. It is normally placed using our KPR1 press below.
It is a two part set (nail not shown) and requires two closing dies.

Product code = 010B(nipple)or 011B(inverted nipple)+style(please see above)+quantity (minimum 1000 sets)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP, pounds sterling.

Dome cap rivet set (GBP per pack)

This versatile 9mm cap rivet set is used in many applications where strength and looks are important. 
It is a two part product, consisting of cap & nail. It requires two closing dies and will need to set on a press.
One side will finish with a slightly domed cap, the other flat.
The nail length is 7mm to accommodate varying stock thicknesses.

Stock items: Matt Nickel & Black
Other finishes to order: Gilt & Antique Brass.

Product code = PF012B+"finish" + "quantity"  (minimum one pack)
Order form
(Please load the order form once only)

If you only require a very small quantity of the above items , please try HERE

---

Tubular Steel-based Rivets ( GBP per 1000)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Sizes = Tube diameter x length x cap diameter ( GBP per 1000)

Product code = RVTTUBSTL+ size + finish (minimum 1000pcs) (n/a = not currently available)

Order form
(Please load the order form once only)

Retaining washers are sometimes used with the above. These are available in nickel or gilt finish as follows:

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

 Product code=RIVWASH="finish"+"quantity" (minimum 1 pack)

Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

---

Double tubular rivets (GBP per 1000 parts)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)
 
The number indicates the approximate diameter. C = Cap, CP = Capped post and P = Post. 

A cap (C) and a capped-post (CP) are used for similar appearance on each side of the item. 
A cap (C) and post (P) should be used when the rear view is not required to match the front. 

The following combinations are possible, measurements are to closest mm.  
9C(cap) or 11C(cap) with any of the following; 
9CP(capped post, 9mm pre-set length), 11CP (capped post, 11mm pre-set length), 8P(post, 9mm pre-set length)
or
10P(post, 11mm pre-set length), 9CP(capped post) or
11CP(capped post, 11mm pre-set length) with any of the following; 9C(cap) or  11C(cap). 

These double tubular rivets require two cutting dies and two closing dies.
 They should be placed using our  KPR1  press below.

Product code=DTR+"colour"+" Part-code " + quantity.
Order form
(Please load the order form once only)

All prices shown on this site are in GBP,  pounds sterling.

---

Single use plastic rivet (GBP per 1000 sets)
(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images is turned off)

This black plastic single use rivet is available to set with a 12mm cap.
This item is normally a machine set rivet but we can supply a hand setting set also. Please call for details
Product code: PLAS/SURIV/12/BLK+ quantity
(Minimum order 500 sets then in increments of 100 sets to 1000 sets, then in multiples of 1000's )
Order form
(Please load the order form once only)

If you only require a very small quantity of the above items , please try HERE

Hand punch & setting set for item above.
(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images is turned off)

Fine punch only (Grey, bottom item in picture above)	19.08
Setting set only (Top set in picture above)	72.15	DIE/PLASUR/HANDSET
Full set, Punch & setting set	82.60	FinePunch & SUR-HANDSET-SET

Product codes: FinePunch or DIE/PLASUR/HANDSET or FinePunch & SUR-HANDSET-SET
(Minimum order 500 sets then in increments of 100 sets to 1000 sets, then in multiples of 1000's )
Order form
(Please load the order form once only)

---

Click here for info on
 

---

Eyelets

UK Sewing Services recommends that suitability tests are carried out on all items prior to production.

If the item you require is not listed below, try here:

If the item you require is listed below and you would like a sample please use :

KPR1
(Foot operated ratchet press) : Available to Purchase or Hire


KPR1 is a foot operated ratchet press. It is supplied complete on a stand which incorporates two side trays for stud part storage.  It is designed to attach most press fasteners, rivets eyelets, jeans buttons etc. It is extremely versatile and can be used for placing piercing trim on textiles or paper and card. We can supply a full range of dies, which are made in the UK of hardened & tempered steel to fit our own ranges or your existing studs or eyelets.

It's fully floating adjustable base allows precision horizontal alignment and exact vertical locking in order to obtain the optimum pressure setting. Once up to speed KPR1 is rated at approx. 240 studs and hour, thus eliminating the need for expensive pneumatic or electric machinery.

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images is turned off)

All new machines are sold with a 6 months back to base warranty, but anyone who has seen our KPR1 will know that it's solid construction & simple internal design will facilitate many years of faithful, trouble-free service.

Full operating instruction are included with each machine.
KPR1 is so simple to use that a complete novice will be producing quality products within minutes !

In short our KPR1 is a sold robust machine that will add considerable value to your products, resulting in increased efficiency, quality, and inevitably customer satisfaction.

Stud prices vary from GBP 0.06 to GBP 0.40 per set dependant on style and quantity.
UKSS supplies all the major stud ranges.
We supply our studs in individual parts packed in 1000's for those that may use more of one part than another.

* (Includes a 5% discount)
No rental increase while the initial kit rented remains the same, guaranteed!

Please click here for printer friendly data sheet

Please click here for specimen rental documents.

20% of all paid rental allowable as a rebate if you decide to purchase at the end of a rental term.
Minimum rental period 6 months. Subject to status.
(Shorter term rental contracts are also available. Please ask for details)

Product code= KPR1
Order form
(Please load the order form once only)

All prices shown on this site are in GBP pounds sterling

Delivery
UK mainland GBP 27.50
EU country between GBP 50.00 and  GBP 90.00,  3 - 7 days, cost & delivery time "country dependant".

---

KPF2 (Heavy duty eyelet Footpress)
This specialist press has been specifically designed for large format eyeleting operations
Available to Purchase or Hire

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images is turned off)

KPF2 is a foot operated press. 

It has been specifically designed to accommodate large eyelets, 13mm-40mm internals.
Our KPF2 is supplied complete on a stand which incorporates two side trays for storage.
 It is extremely versatile and can be used for placing piercing trim on textiles or printed stock such as paper and card etc.

It's floating, adjustable base allows precision horizontal alignment. It's versatility eliminates the need for expensive high maintenance pneumatic or electric machinery.

All new machines are sold with a 6 months back to base warranty, but anyone who has seen our KPF2 will know that it's solid construction & simple internal design will facilitate many years of faithful, trouble-free service.

KPF2 is so simple to use that a complete novice will be producing quality products within minutes !

In short our KPF2 is a sold robust machine that will add considerable value to your products, resulting in increased efficiency, quality and inevitably increased customer satisfaction.

Please click here for printer friendly data sheet

Rental prices
(Rental is available to UK addresses only and subject to status.)

* (Includes a 5% discount)
No rental increase while the initial kit rented remains the same, guaranteed!

20% of all paid rental allowable as a rebate if you decide to purchase at the end of a rental term.
Minimum rental period 6 months. Subject to status.
(Shorter term rental contracts are also available. Please ask for details)

Product code= KPF2
Order form
(Please load the order form once only)
Delivery
UK mainland GBP 27.50
EU country between GBP 50.00 and  GBP 90.00,  3 - 7 days, cost & delivery time "country dependant".

---

How can we improve our site ? Tell-us

Back to Top

SupplyDivision contacted at the offices below.